|Place of Origin:||Guangdong, China (Mainland)|
|Minimum Order Quantity:||1 set|
|Packaging Details:||plywood case|
|Delivery Time:||10-15 days after receive prepayment|
|Payment Terms:||T/T, Western Union|
|Supply Ability:||200 Set/Sets per Month|
|Doors:||PVC High Speed Shutter Doors||Control:||PLC|
|Wind speed:||22-25m/s||Class:||100 class|
clean room air showers,
dust free room
Cleanroom Cargo Air Shower Tunnel With Fast Speed Scrolled Doors For Forklift
Doors: Soft PVC Fast Speed Scrolled Doors
Door Net Width: 1800mm
Air Shower Tunnel for clean room is a kind of partial clean equipment with rather strong universality and
is installed at the partition between the clean and non-clean rooms. Its used for the personnel or matters
to shower before entering the clean area. After using it, the dust could effectively be reduced to enter the
clean area and maintain the normal working status.
Blowing type: single-side blowing, double-side blowing, three-side blowing.
1. The control system run automatically by photoelectric sensor, the two door are electric interlocked.
(One door in open state, the other door must in close state. When people enter air shower, the system will
shower automatically by photoelectric sensor)
2. Air shower time from 1 to 99 seconds which can be adjustable
3. Adopt Pre filter and HEPA filter
4. The door, bottom-board, nozzles are used of stainless steel, good appearance.
5. When air shower is used to pass cargo, it is without bottom-board.
1. Large Airflow and Low Noise Blower fan
2. Neoprene vibration isolator for blower
3. 99.99% 0.3 micron HEPA filter
4. Stainless Steel adjustable air nozzles
5. MEVR 7 pre-filters located at the botton of the wall for easy access
6. Electric door interlock 12DV with 50kg holding force.
7. Emergency stop station (Shutts off blower and turns off locks)
8. Commercial duty door closers.
9. LED light fixture.
10. Pre-wire control panel with non-fused disconnect switch, tranfermers, motor starter with short circuit and overload protection and fused and circuit breaker.
1. 99.999% @ .12 micron ULPA filter
2. MERV 8-10 Pre-filters
4. Touchscreen display
5. Vertical laminar flow ceiling
6. Hazardous location electrical
7. Automatic door systems
8. Magnehelic gauge for HEPA filter
10. Audible alarms
11. Safety glass
12. Additional emergency stop stations
13. Light switch for interior LED light
|Product type||Cleanroom Cargo Air Shower Tunnel With Fast Speed Scrolled Doors For Forklift|
|Material for casing||T=1.2MM Steel with Spray painting|
|Material for doors||Soft PVC|
|Door type||High Speed Shutter Doors|
|Blowing way||3-side blowing|
English intelligent control panel with human voice and
PLC control system
|HEPA filter efficinecy:||99.99%|
|Photoelectric sensor||OMRON brand|
|Shower time||0-99s adustable|
|Spurt wind speed||22-25m/s|
|Safeguard||Leakage switch and thermal overload relay (Protect people from electric leakage)|
size and specificaton:
|Product||Cleanroom Cargo Air Shower Tunnel With Fast Speed Scrolled Doors For Forklift|
|External dimensions (mm)||W2300*D2600*H2300|
|Internal dimensions WxHxD(mm)||1800*D2600*H2000|
|Doors||2 sets of High speed shutter doors|
|Suitable||Both People and Goods|
|Nozzles||18+18+12=48 PCS(3-side blowing)|
|Blower fan||4 sets|
|HEPA filter size||610x610x90mm|
|HEPA filter qty||4 PCS|
|HEPA filter efficiency||H13|
|Photolectric sensor||ORMON 2 PCS|
|Fluorescent Lamp||Philips 2x 20W|
|Air shower time||0-99 s Adjustable|
|Spurt wind speed||22-25m/s|
|Control system||Microcomputer control panel with human invoice prompt, electric interlock, automatical blowing by photoelectric sensor
Air shower Details:
Drawing Of Air Shower Tunnel
Testing in factory:
All of equipment will be individually tested for safety and performance in accordance with international Standards before shipment.
Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.
Testing before shipment:
1. Appearance inspection
2. Electrical safety tests
3. Air wind speed testing
4. Function testing
The warranty of our equipment is for 1 year, but excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual with testing report.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or document request.
1. HEPA filter: It should be changed in half or one year once.
2. Pre filter: It should be changed in 3-6 month once.
How can I rate the efficacy of my air shower?
You can rate the efficacy of the air shower by measuring the air flow velocity at each nozzle.
Each nozzle is designed to provide up to 22-25m/s, If the measured velocities fall significantly short of 22m/s,
please check whether the HEPA filters need to be replaced.
Why you choose ZHISHENG Company ?
Fast reply in 12 hours if we receive any inquiry or request from customer
Familiar with equipment.
Technician or enginner can go to Southeast Asian countries for guiding insallation of machines. Like Thailand, Vietnam, Philipines, Malaysia and so on.
• Production period:15-30days
• Shipping notice or insurance for you after the goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide 1 year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.
30% prepayment by T/T at order, the balance of payment before shipment.
Cleanroom equipments,like air shower, FFU. It is one-year warranty.
We have CE and ROHS Certificate for air shower
व्यक्ति से संपर्क करें: Miss. Rita Guo